Design: DIN3202 F6 | |||||
Flange drilling is according to EN1092-1 | |||||
Working Pressure: | PN10 | PN16 | |||
Shell Test: | 1.5Mpa | 2.4Mpa | |||
Seat Test | 1.1Mpa | 1.8Mpa | |||
Application: | W.O.G. | ||||
Test Standard | EN 12266-1 / API598 | ||||
FEATURES
• Swing check valve, while allowing the flow moving to the desired flow direction, stops the flow when exposed to backflow
• The disc hinged inside the body is placed within the flow section
• With the start of movement at defined flow direction on the system, the disc leaves the flow section by turning in its axis and allows the flow pass
• When the flow stops, the disc sits on the machined sealing seat through its own weight and maintains 100% tight sealing
• Valve body and disc is cast ductile iron, sealing surfaces are made of brass material or EPDM rubber
• Head loss is lower compared to other check valve types
• Coated with fusion bonded epoxy
APPLICATIONS
Steam, superheated water, hot water, cold water, fluids without acidity or alkalinity properties,chemicals
TEMPERATURE
+200 °C