FEATURES 

• PN10/PN16/PN25 metal seated gate valve is operating by the brass seated iron wedge moving perpendicular to the flow axis through a worm machined stem multi turned 

• Tight sealing is achieved through brass seated on wedge fully contacting
The body seated ring, leakage grade is up to grade B as Min. 

• In each time the valve is opened, the flow on the line cleans the sealing surface,  prevents from dirt and deposits 

• With its short installation length( DIN F4/F5), does not occupy a big place 

• It has ductile iron body and stainless steel stem 

• Inner and outer surfaces are coated with minimum 250 microns fusion bonded epoxy 

• Suitable to install actuator and gearbox 

• Suitable to use with ground and underground applications.Can be operated with extension spindle 

• Very low head loss rating. Can be operated with lower torque ratings, no maintenance needed 
 
APPLICATIONS 
 
Hot water, cold water, fluids without acidity or alkalinity properties 
 
TEMPERATURE 
 
+130 °C